Automatic Honeycomb Core Machine for IKEA

Automatic Honeycomb Core Machine for IKEA

We are a highly professional and experienced suppliers of full-automatic honeycomb core Machine for IKEA honeycomb core machine, honeycomb panel machine in China.

1.High Speed Cutting, max. 700 cuts/min.
2. Quick glue roller change system, 20 minutes to change all gluing rollers
3.Range of core thickness is 6mm-100mm

Description

High Speed Full-Automatic Honeycomb Core Machine for IKEA

Low Cost Honeycomb Core Machine

1.Description

This machine not only can make endless honeycomb core, but also honeycomb sheets(  honeycomb core stick).It makes the paper from rolls to honeycomb core, the proceed as following:Paper Roll Loading -> Feeding-> Gluing -> Lamination & Heating ->Surface paper gluing ->Core Cutting -> Notching -> Slitting-> Stacking. Paper honeycomb core widely using in door stuffing; paper panel lamination.

Yalian honeycomb machinery factory supplies automatic honeycomb core machine. Width 1600-2500 mm. The whole production needs 1-2 people to operate at the same time. It is easy to manufacture honeycomb core with thickness of 6-100mm, and the production capacity is 3-12 tons / shift.

Features

1. High Speed Cutting,max. 800 cuts/min. 
2. Quick glue roller change system,30s to change all gluing rollers
3. Automatic glue feeding system, no need to watch the glue feeding all the time.
4. Min. 6mm thickness of honeycomb make, to replace the corrugating board.

2.Technical Data

order number project apply to 1600-2500mm honeycomb core machine
1 Maximum width of paper core appropriate for 1600-2500mm
2 Paper core cutting accuracy ±0.15mm
3 Paper core shear thickness apply to 6-80mm
4 Honeycomb side length 2-4 groups cell size
5 Applicable paper apply to100-180 gsm highly intensified corrugated paper
6 Select glue apply to starch glue
7 Maximum width of paper core (unstretched) appropriate for 1600-2500mm
8 Power Comsuption 60-80KW
9 Power supply Power supply  3Ph, 380V, Or Customize
10 Heating ways Electrical heating
11 Air compressor Air compressor  ≥7.5KW, gas output: 0.8³/min

3、Supplying list

Order number Name  

Qty

 

Techniques

 

picture

Honeycomb core machine (6-8Rolls)
   1   paper  feeder

 

 

 

 

3-4sets

 

 

1.Maximum size of base paper (wide X diameter):2000mm X 1400mm

2. Maximum bearing 2.5T/ roll paper

3. Applicable core inner diameter 76mm

4. Pneumatic brake device adjusts paper tension

5. It can be realized that two rolls of paper can work at the same time.

6. Size: 4X 1.9 X 2.5M

7. Power: 4KW*3-4pcs

2 Gluing Machine  

 

 

 

 

1 sets

(2 units)

1.Equipped with 2 sets of different honeycomb aperture coating mechanism, the base paper and the top roll can be taken off automatically during downtime

2.Honeycomb aperture conversion through cylinder conversion, rapid and convenient, at the same time, cots cleaning is convenient, the top rollers do not affect each other

3.Rubber quantity is regulated by eccentric wheel

4. Coated cots, impregnated cots, surface hard chromium finish grinding processing.

5. Each rubber roll is provided with a lateral adjusting device for adjusting the aperture of the bee hole

6. Single variable frequency speed regulation

7. Rubber pot made of stainless steel

8. Installed power: 3KW

 

3

 

Core Laminating & Drying Machine

 

 

1 sets

1.Pneumatic pressing, conveying pressure roller selected seamless pipe grinding, surface hard chromium plating treatment

2. Upper and lower double layer heat insulation of oven

3. Heating mode is infrared heating up and down

4. Temperature range can be set to adjust 0-150 ℃

5. Drying power: 25 KW

6. Bonding, drying paper core door width: ≤ 2000mm

  4 Surface paper gluing machine  

1 sets

Same as 2 approximate to 2

all over again

 

 

5

 

 

High Speed Horizontal   cutting Machine

 

 

 

 

1 sets

1.  Transverse effective width ≤2000mm, cutting knife with horizontal action

2. Guide rail adopts Taiwan silver brand linear guide.

3. With two kinds of pressure rollers, it is convenient to use the cylinder to change and adjust.

4. Siemens motor 7.5 KW is used in traction cutting, and the feeding and cutting speed ratio is stable.

5. Equipped with dual display 2L automatic refueling system, each joint of the equipment for timing and quantitative refueling

6.  Cutting speed:≤  800times/min

 

 

6

 

Belt Conveyor 

 

 

1 sets

1. Use butadiene rubber belt transport, paper core transport stable, transport speed adjustable

2. PLC frequency conversion regulation, transmission speed and the whole line synchronization

3. Power: 0.75kW

honeycomb core machine(Belt Conveyor)

4、Our Service

Pre-Sales Service

* Inquiry and consulting support.
* Machine Design and Quotation Sheet with Technical Details
* View our Factory and See the Machine Running

After-Sales Service

* Training how to install the machine, training how to use the machine.
* Engineers available to service machinery overseas.

has been added to your cart:
Checkout